Reliable Qualification of Large CRA & FOV lenses

Modulation transfer function, wavefront error, lens parameters in a single click

Phasics' wavefront sensing technology provides accurate on-and-off axis MTF calculation of objective lenses even with large field of view and large chief ray angle. Metrology solutions are available from the stand-alone wavefront sensor to the fully automated test station. All solutions benefit from Phasics' unique wavefront measurement technology and perform reliable and comprehensive measurements while staying an easy-to-use metrology tool. Lens test stations (integrated machines and optical test benches) and wavefront sensors are available in the UV, NIR, SWIR, MWIR, and LWIR bands. Phasics' metrology tools address the needs for lens quality control in R&D and production.

• ▽ Measurement setup

  

  Phasics offers an exclusive lens measurement principle in single pass.  The optical setup to perform lens quality control is very simple; the wavefront is directly measured with no relay lens.  Calculations then use light propagation theory to provide both wavefront aberrations and the MTF. The MTF is obtained in a single shot at any frequency without using a target or any scanning. All wavefront aberrations are also provided with this single acquisition. 

• ▽ Automatic field scanning and wavelength change with the Kaleo MTF

  

  Using the same principle, Phasics has developed the Kaleo MTF machine. The measurement process can be fully defined by the user as they indicate which measurements shall be done and saved by defining the measurement sequence. The bench automatically positions and aligns the lens. No external input parameter is needed to start the measurement and to compute the results. Results are displayed at the end of acquisition and a summary table report is automatically saved.